Salsa Booth
14 Day Inspection Period
If you have any issues during your 14-day inspection window please contact us.
Assembly
Step 1
Optimizing iPad for Salsa
What you will learn
Important settings to make a perfect experience for you and your guests
How to prevent guests from sneaking into your settings
How to set the iPad’s brightness
For information on purchasing an iPad for Salsa, check out our article here.
Step 2
Installing iPad and Faceplate
What you will learn
How to install your iPad into Salsa
Note
Do not use power tools when screwing in the face plate.
Salsa comes with the 12.9" 3rd-6th Generation iPad Pro faceplate pre-installed. You can purchase an alternative faceplate here if you have a different iPad.
For a written step-by-step assembly guide, see here.
Caution
Always have an iPad inserted before turning the booth on
Please note your warranty will be void if Salsa is powered on without an iPad or the insert installed.
You can also use the cardboard insert instead of the iPad. Don’t throw this away!
Step 3
Salsa Setup
What you will learn
How to set up Salsa for an event
Step 4
Salsa Breakdown
What you will learn
How to properly disassemble Salsa after an event
How to ship Salsa
Replacement Parts
Purchase backups to ensure your events run flawlessly.
Upgrade Warranty
Get peace of mind and save money on parts and repairs.
FAQs
Where do I buy replacement parts?
Can Salsa run on a battery?
Yes! Salsa needs to be plugged into a 110 - 120V outlet. We recommend the Anker Powerhouse, which can last for 6 to 12 hours depending on usage. We also have success with the Ryobi 40v, which gives 3-5 hours of power depending on how heavily the system gets used. You can purchase additional batteries for the Ryobi 40v for events needing additional power!
Why isn't my iPad charging in Salsa?
Try the following steps:
Make sure you are using the correct charging cable. Salsa comes with a USB-C to USB-C charger, but if you are using a 2nd Generation iPad Pro, you will need a USB-C to Lightning charger.
See if your iPad charges outside of Salsa booth using a separate charging cable. If the iPad still doesn’t charge, then it could be a faulty iPad or cable.
If your iPad charges outside of Salsa booth, but not in Salsa booth, then please contact our support team.
My LED lights aren’t working!
Try the following steps:
Watch the assembly videos to ensure that your iPad is set up and installed correctly inside Salsa.
Connect Salsa App to the Salsa LEDs. View the tutorial here.
Make sure that the LED brightness is not set to 0.
Unpair and repair the LEDs.
If problems persist, please contact our support team.
My LED lights are not connecting!
View the tutorial for LEDs here.
How do I clean my Salsa?
Your Salsa unit can be wiped down with an electronics cleanser, such as isopropyl alcohol. The only area that should not be wiped down with alcohol is the clear diffusor over the LEDs. This should be cleaned and wiped down with distilled water.
Can I leave my iPad in the Salsa head?
Your iPad can be left within the Salsa head and stored within the Salsa hard case in between events and when transporting the booth.
Can I test my Salsa without an iPad installed?
It’s necessary that either the cardboard faceplate insert or an iPad are installed into the faceplate at all times when the Salsa unit is powered on. Both are safe choices for your booth.
What is the height and weight of Salsa?
Total Height: 64”
Head Height: 21”
Width: 12”
Pole Width: 5.5”
Pole Height: 20.75”
Case Dimensions: 24.5” × 19.37” × 12.22”
Case Weight: 19 lbs
Booth Weight with iPad: 37 lbs
Total Combined Weight: 58 lbs
What are the operating requirements of Salsa?
Line voltage: 100V to 240V AC
Frequency: 50Hz to 60Hz
Operating temperature: 30° to 95° F (10° to 35° C)
Storage temperature: -13° to 113° F (-25° to 45° C)
Relative humidity: 0% to 90% noncondensing
My Salsa and/or my carrying case broke, what do I do?
You have a 14 day inspection period for all hardware issues that present upon receipt of the unit.
For booth damages occurring after that timeframe, please contact our support team.
Your SKB 2317-14 carrying case has a lifetime warranty. You can contact SKB Cases directly for support.